Xigmatek rolled out the Janus low-profile CPU Cooler. It uses a C-type aluminum fin-array design. From a mirror-polished nickel-plated copper base, six 6 mm-thick heat pipes convey heat to an aluminum fin-stack arranged along the plane of the motherboard. It is ventilated by two fans arranged in a top-flow push-pull configuration.
The top fan is a 10 mm-thick 120 mm spinner, while the bottom one is a 15 mm-thick 80 mm one. The bigger fan spins at 800-1200 RPM, pushing up to 38.42 CFM of air; while the smaller one does around 2000 RPM, pushing 13.53 CFM. Measuring 120 x 110 x 45 mm (WxDxH), the Janus weighs about 430 g. It supports most modern CPU socket types, including Intel LGA1150, LGA1155, LGA1156, LGA2011, LGA1366, and LGA775; and AMD AM3+/AM3/AM2+/AM2, FM2/FM1.
The top fan is a 10 mm-thick 120 mm spinner, while the bottom one is a 15 mm-thick 80 mm one. The bigger fan spins at 800-1200 RPM, pushing up to 38.42 CFM of air; while the smaller one does around 2000 RPM, pushing 13.53 CFM. Measuring 120 x 110 x 45 mm (WxDxH), the Janus weighs about 430 g. It supports most modern CPU socket types, including Intel LGA1150, LGA1155, LGA1156, LGA2011, LGA1366, and LGA775; and AMD AM3+/AM3/AM2+/AM2, FM2/FM1.
Source: Techpowerup.com
No comments:
Post a Comment